FREE Quality, Health and Safety, and HR Business Software Click <HERE> to Learn More and Download
THIS SITE CONTAINS NO GOOGLE OR SIMILAR TYPE ADS and NO CLICK BAIT LINKS
QHSE Support >(Site Map) Health & Safety Guidance > Work Equipment >
Work Equipment Risk Assessment - Controls (page 2 of 2)
Work Equipment Risk Assessment - Page 6 of 7
Links to Additional Pages
Page 1 - Section 1 - Suitability
Page 2 - Section 2 - Maintenance
Page 3 - Section 3 - Restrictions, Section 4 - Guards and Section 5 - Effects of Temperature
Page 4 - Section 6 - Specific Hazards
Page 5 - Section 7 - Controls (page 1 of 2)
Page 7 - Section 8 - Miscellaneous
Risk Assessment 'work equipment Controls, page 2' Questions Cover:
Controls (part 1 of 2)
7.8Do control operators have a clear and full view of the equipment?
7.9If equipment causes a hazard in operation, is it fitted with a readily accessible and clearly identified emergency stop, which overrides all other controls?
7.10* Can the operator ensure no person is in the danger zone while he/she is operating the equipment?
7.11* Is a safe system of work is required to prevent persons entering the danger zone while the equipment is operating?
7.12If the above controls * are not practicable, are audible, visible or other warnings provided before the equipment is started?
7.13Is the control system designed to fail safe in event of loss of power?
7.14Are lock-off/ permit to work systems in place where appropriate?
Notes: For optimal printing use the print button at the end of this assessment and set your printer options NOT to print headers and footers. To scroll down use a combination of the two scroll bars (browser page and topic page scroll bars.
Kindly be patient as the interactive form may take a moment to load, depending on your internet speed.
Page 6 - Section 7 - Controls (page 2 of 2)
Help file v1.175.0619 : Copyright © 2024 Brian G. Welch MSc(QHSE), NVQ4(OH&S), CMIOSH - Supported by Website On Safe Lines